Aprilia longitudinal 65° V-4 cylinder, 4-stroke, liquid cooling system, double overhead camshafts (DOHC), four valves per cylinder
Bore x Stroke:
78 x 52.3 mm
Maximum power at the crank:
180 HP (132,4 kW) at 12.250 rpm
Maximum torque at the crank:
115 Nm a 10.000 rpm
Airbox with front dynamic air intakes.
4 Weber-Marelli 48-mm throttle bodies with 8 injectors and latest generation Ride-by-Wire engine management.
Choice of three different engine maps selectable by the rider with bike in motion: T (Track), S (Sport), R (Road)
Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and “stick-coil”-type coils
4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with engine control unit-controlled butterfly valve and integrated trivalent catalytic converter (Euro 3)
Flywheel mounted 420W alternator with rare earth magnets
Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling)
6-speed cassette type gearbox
1st: 39/15 (2.6)
2nd: 33/16 (2,063)
3rd: 34/20 (1.7)
4th: 32/22 (1,455)
5th: 34/26 (1,308)
6th: 33/27 (1,222)
Multiplate wet clutch with mechanical slipper system
Straight cut gears and integrated flexible coupling, drive ratio: 73/44 (1,659)
Chain: Drive ratio: 40/16 (2.5) or 42/16 (2.625)
Aluminium dual beam chassis with pressed and cast sheet elements.
Sachs steering damper
Sachs upside-down Racing fork, Æ 43 mm stanchions with Tin surface treatment. Low profile forged aluminium radial calliper mountings. Completely adjustable spring preload and hydraulic compression and rebound damping. Wheel travel: 120 mm
Double braced aluminium swingarm; mixed low thickness and sheet casting technology.
Sachs mono-shock absorber adjustable in: spring preload and hydraulic compression and rebound damping. APS progressive linkage. Wheel travel: 130 mm
Front: Dual 320-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo monobloc radial callipers with 4 Ø 34-mm opposite. Sintered pads. Radial pump and metal braided brake hose
Rear: 220-mm diameter disc; Brembo calliper with two Ø 32 mm separate pistons. Sintered pads. Pump with integrated tank and metal braided hose
Aprilia 3 spokes in aluminium alloy.
Front: 3.5” X 17”
Rear: 6” X 17”
Front: 120/70 ZR 17
Rear: 200/55 ZR 17 (alternative: 190/50 ZR 17; 190/55 ZR 17)
Max. length: 2040 mm
Max. width: 735 mm (at the handlebar)
Max. height: 1120 mm
Min. height from the ground: 130 mm
Saddle height: 845 mm
Centre to centre distance: 1420 mm
Trail: 105 mm
Steering angle: 24.5°
Fuel tank capacity:
17 litres (4-litre reserve included)
* Kerb weight, without battery and fluids.